Digital Sensors

Model Measuring Range DVN-100-4 DVP-100-4 0 to -100kpa (%vacuum) 0 to -100kpa (%vacuum)

Specifications Compatible Fluids All non-corosive gases, Filtered, non-lubricated air Power Supply 18-30 VDC. Polarity protection.+ 10% Current Draw <100mA Transistor Output 125 mA 24V DC, Programmable N.O. or N.C. Output Indicators LED Output 1 Red LED Output 2 Green LED Programming Key Buttons Display In vacuum % (2-digit, 7-segment red LED, 8.5mm) Electromagnetic Comp. Industrial Standard, Class B Body Material Polyacetal Protection IP 65 Electrical Connection M8-connector, 4pin Connection G 1/8 NPS M or 10-32(M5)F Impact Strength 10 G: XYZ Axis Overpressure 4 BAR (58psi) Hysteresis Adjustable

Digital Sensors

VACUUM CODE DISPLAY RANGE UNITS 1 -100 ~ 100 kPa 3 -75 ~ 75 cmHg 4 -1.00 ~ 1.00 bar 5 -14.5 ~ 14.5 psi 6 29.5 ~ 0 inHg MAXIMUM PRESSURE:58psi (200kPa) PRESSURE CODE DISPLAY RANGE UNITS 2 -0.10 ~ 1.00 Mpa 4 -1.00 ~ 1.00 bar 5 -14.5 ~ 14.5 psi MAXIMUM PRESSURE: 210psi (1.5 MPa) RESPONSE TIME SW VALUE MILLISECONDS FO 5* F1 25 F2 50 * FACTORY SETTING

Specifications Media: Non lubricated air, Non-corrosive gas. Pressure Port: G1/8 NPS male and M5 (10-32) female. Operating Temperature: 14~122 °F (-10 TO 50C) Storage Temperature: -4~158 °F (-20 TO 70C) Humidity: 65% RH maximum Electrical connection: JWS1.5x40 Power Supply: 10.8~26.4V DC (Including ripple) Output: NPN or PNP available, 100 mA max. open collector Display: In vacuum % (3-digit, 7 segment red LED) Switch Point Setting: Adjustable by push button -14~145 psi Hysteresis: 0~30 counts Response time: approx. 5ms Repeatability : ± 3% FS Thermal Error: ± 3% of Full Scale In temperature range 32-122 F Current Consumption: 30mA max. Dielectric Strenth: 500V AC, 1min. Insulation Resistance: 100 Mega Ohm minimum Material: Body: Polycarbonate, Vacuum port: Brass Ni-plating Weight: 1.76 oz.

Digital Sensors

Specifications Media: Non lubricated air, Non-corrosive gas. Pressure Port: G1/8 NPS male and M5 (10-32) female. Operating Temperature: 14~140 °F (-10 TO 140C) Storage Temperature: -4~158 °F (-2 TO 70C) Humidity: 35~85% RH Electrical connection: QD: 4 pin pico 8mm connector Power Supply: 12~24V DC ± 10% Output: NPN or PNP available, 80 mA max. Analog Output: 1~5V DC, + 0.04, 1mA max. Display: In vacuum % (2-digit, 7 segment red LED) Switch Point Setting: Adjustable by trimmer Hysteresis: approx. 0~15%FS Response time: approx. 2ms Repeatability : ± 3% FS Thermal Error: ± 0.1% of Full Scale In temperature range 32-122 F Current Consumption: 35mA max. Dielectric Strenth: 500V AC, 1min. Insulation Resistance: 100 Mega Ohm minimum Material: Body: Polycarbonate, Vacuum port: Polyacetal Weight: 1.76 oz.