Vacuum Valves & Accessories

Valves:

• Dual Flow Valves: Limit vacuum leakage in a system where some of the suction cups may not be sealing contact with the work piece.

• Tri-Flow Valves: A cross between Flow Sensor Valves and Dual-Flow Fittings. They limit vacuum leakage in a system where some of the suction cups may not be in sealing contact with the work piece.

• Flow Sensor Valves: Eliminate the problem of vacuum loss thru non-working standard cups or thru valved cups overhanging the work piece edge.

• Release Check Valves: Used for high-flow vacuum release applications such as those involving vacuum reservoirs or larger mono-stage or multi-stage vacuum pumps.

• Vacuum Check Valves: Used to hold downstream vacuum whenever the vacuum source is removed or lost.

• Vacuum Check Valves with Release Check: Used with a single suction cup so a non-porous, high value, work piece won’t be immediately dropped if the system vacuum source is lost.
• Vacuum Latch Release Valve: Used to latch and hold vacuum within the suction cup until a positive pressure signal operated a pilot valve, causing the vacuum to dissipate and release the part.
  
  

Accessories:

• Swivel Joints

• Tee Adaptors: Mounts any suction cup having a female fitting and allows daisy chaining vacuum tubing from cup to cup to simplify plumbing.

• Level Compensators: Used to compensate for height differences on a work piece surface.

• Filters: Both T-Style and Inline Filters.

• Sheet Separators: Used to warp the edges of sheet goods to promote separation from the next sheet in a stack.

• Blow-off Module: Pneumatic Blow-off Module provides 25cc of stored compressed air to give a robust pulse to dissipate vacuum in a system whenever the vacuum pump air supply is vented.

• Pipe Plugs w/ O-ring Seal